Centrifugal disc polishing machine – (CF series Zero gap) | Centrifugal Disc Finishing Machine
1. Centrifugal disc polishing machine technical info
For small and high precision component specifically size lower than 0.5 mm components, Inovatec CF series machine can offer time saving and repeatable result with low cost effective solution.
The application range is wide, from metal parts to thermostat rubber and plastic materials, can offer a luster surface from deburring to shinning surface performance
2.1 Highly user friendly
The rotational speed, machine running time (forward/backward respectively), compound dosing as well as other processing data can be easily programmed into Siemens PLC Navigate touch screen system with dozens of different program can be stored for different sample.
2.2 Absolute reliability
Highest degree of mechanical component and electric component ensuring highest level of reliability and maintenance free product
2.3 Extremely cost-effective
Low initial investment and low cost for customer, low processing cost compared with conventional manual process
2.4 Excellent process results
Wide range of applications including deburring, polishing , de-rusting, degreasing as well as edge rounding
2.5 Ceramic ring/tungsten alloy ring
The system is typically used in dry polishing system which guaranteed high productivity and precision in surface finishing result. Besides, the durability of ring material itself provides maintenance free quality.
2.6 Zero gap Disc/Ring
The zero gap system allow super fine component to be finished in the barrel without being stuck in gap between disc and ring. Because of specific design structure, even very fine grinding and polishing of parts size below 0.5 mm are able to finish by the machine.
The application of the machine is wide including high requirement industry area, especially for small batch high requirement application including jewelry industry, medical industry, dental industry as well other specified industries.
4. Working principal:
The CF series machine from Inovatec work on the centrifugal disc finishing concept, it functioned with highly effective and efficient mass finishing system. During this process, the components are processing in a barrel shaped container where media and components make rotational relative movement.
Also the media inside the container driving by centrifugal force of disc which generated from the bottom of the container. The disc separate from the container wall by an adjustable gap where the water is flowing though in the wet processing machine. In dry processing machine for fine polishing, however, the gap is there for disc rotating.
The centrifugal force with different media act on surface of component gives different finishing result. So this offer at least 20 times high productivity compared with vibratory finishing process. During wet surface finishing processing a constant water and compound flow which at meantime take off wear off debris together. This leaves the components a fresh and clean surface.